Hetzner独立服务器安装 Proxmox VE 7详细保姆级教程

1、通过面板启动救援模式,记住登录密码,用于救援模式和安装后的PVE7。

Hetzner独立服务器安装 Proxmox VE 7详细保姆级教程

2、重新启动服务器

Hetzner独立服务器安装 Proxmox VE 7详细保姆级教程

3、通过 ssh root@10.11.12.13 连接服务器的救援系统,密码为启动救援模式生成的密码。

Linux rescue 5.19.11 #1 SMP Mon Sep 26 04:42:52 UTC 2022 x86_64

-------------------------------------------------------------------------------------------------------------------------

  Welcome to the Hetzner Rescue System.

  This Rescue System is based on Debian GNU/Linux 11 (bullseye) with a custom kernel.
  You can install software like you would in a normal system.

  To install a new operating system from one of our prebuilt images, run 'installimage' and follow the instructions.

  Important note: Any data that was not written to the disks will be lost during a reboot.

  For additional information, check the following resources:
    Rescue System:           https://docs.hetzner.com/robot/dedicated-server/troubleshooting/hetzner-rescue-system
    Installimage:            https://docs.hetzner.com/robot/dedicated-server/operating-systems/installimage
    Install custom software: https://docs.hetzner.com/robot/dedicated-server/operating-systems/installing-custom-images
    other articles:          https://docs.hetzner.com/robot

-------------------------------------------------------------------------------------------------------------------------

Rescue System up since 2022-12-10 22:13 +01:00

Hardware data:

   CPU1: AMD Ryzen 5 3600 6-Core Processor (Cores 12)
   Memory:  64250 MB
   Disk /dev/nvme0n1: 512 GB (=> 476 GiB) 
   Disk /dev/sda: 6001 GB (=> 5589 GiB) 
   Disk /dev/sdb: 6001 GB (=> 5589 GiB) 
   Total capacity 11 TiB with 3 Disks

Network data:
   eth0  LINK: yes
         MAC:  de:ad:be:ef:de:ad
         IP:   10.11.12.13
         IPv6: 2a01:4f9:1a:dead::2/64
         Intel(R) Gigabit Ethernet Network Driver

root@rescue ~ # 

4、开始安装 PVE7

root@rescue ~ # installimage
Hetzner独立服务器安装 Proxmox VE 7详细保姆级教程

编辑主机名和磁盘分区等信息,F10 保存退出编辑器。

参考:https://docs.hetzner.com/robot/dedicated-server/operating-systems/installimage/


                Hetzner Online GmbH - installimage

  Your server will be installed now, this will take some minutes
             You can abort at any time with CTRL+C ...

         :  Reading configuration                           done 
         :  Loading image file variables                    done 
         :  Loading debian specific functions               done 
   1/15  :  Deleting partitions                             done 
   2/15  :  Test partition size                             done 
   3/15  :  Creating partitions and /etc/fstab              done 
   4/15  :  Formatting partitions
         :    formatting /dev/nvme0n1p1 with ext3           done 
         :    formatting /dev/nvme0n1p2 with swap           done 
         :    formatting /dev/nvme0n1p3 with ext4           done 
   5/15  :  Mounting partitions                             done 
   6/15  :  Sync time via ntp                               done 
         :  Importing public key for image validation       done 
   7/15  :  Validating image before starting extraction     done 
   8/15  :  Extracting image (local)                        done 
   9/15  :  Setting up network config                       done 
  10/15  :  Executing additional commands
         :    Setting hostname                              done 
         :    Generating new SSH keys                       done 
         :    Generating ramdisk                            done 
         :    Generating ntp config                         done 
  11/15  :  Setting up miscellaneous files                  done 
  12/15  :  Configuring authentication
         :    Setting root password                         done 
         :    Enabling SSH root login with password         done 
  13/15  :  Installing bootloader grub                      done 
  14/15  :  Running some debian specific functions          done 
  15/15  :  Clearing log files                              done 
         :  Executing post installation script

----- Update and upgrade system, please wait ... -----

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

... ... ... ... ... ... ... ... ... ... ... ... ... ... 

----- Done installing Proxmox VE -----


                  INSTALLATION COMPLETE
   You can now reboot and log in to your new system with the
 same credentials that you used to log into the rescue system.

5、重启系统

root@rescue ~ # shutdown -r now

如果无效,通过面板重启。

Hetzner独立服务器安装 Proxmox VE 7详细保姆级教程
Hetzner独立服务器安装 Proxmox VE 7详细保姆级教程

6、通过 ssh root@10.11.12.13 连接服务器,密码和救援模式密码相同。

7、通过 https://10.11.12.13:8006 连接Proxmox Web GUI,使用 root 和 救援模式密码登录。

本文来自《作者:zxxx》,经本网转载发布,本文观点不代表《中国IPv6网》立场,转载请联系原作者。

(0)
上一篇 2022年12月14日 上午11:30
下一篇 2022年12月25日 下午11:26

相关推荐

  • CloudFlare SaaS 免费CNAME接入小白级教程

    前言 介于网络坏境不同,很多人有需求在保留国内域名DNS服务器不改变的情况下,还能接入国外服务商比如CloudFlare的服务,使得国内外都能有较好的网络使用感受,以前通过Clou…

    2023年1月12日
    7100
  • 下一代互联网研究与CNGI-CERNET2

      下一代互联网NGI的提出主要针对目前互联网技术体系中存在的诸多先天缺陷。这些缺陷已经导致了互联网高速发展中的一系列严峻问题,并且很难在现有技术体系下通过有限的改良得到解决。因此…

    应用技术 2010年8月8日
    83300

发表回复

您的电子邮箱地址不会被公开。 必填项已用*标注